Putting Lessons Continued...

Lesson 36-Body alignment when putting is only important as it pertains to delivery of the putter at impact. Match alignment to your release.

Lesson 37-Match alignment to release? Closing the putter at impact? Set up closed. Hold the finish with the putter face up? Open your stance.

Lesson 38-You don't putt with your feet. Position your feet to balance your stroke NOT to determine direction the ball will leave the putter

Lesson 39-Great putters control impact. Poor putters worry about aim/alignment. Best Lesson? Teach yourself the feel of square at impact.

Lesson 40-Source of motion moves the hands. Hands control the putter. Controlling direction requires a knowledge of this relationship

Lesson41-Active or passive, the hands control the putter at impact=control direction ball leaves. #Consistent position to relative to path

Lesson 42-Putting stroke will work better if the hands only have one job-position of the clubface. Never accelerate putter with your hands.

Lesson 43-Source of motion swing the hands and hands control where face is pointed. Source of motion controls speed!! Never hands.

Lesson 44-Key to speed control is the ability to make the proper length stroke, for the distance required, without changing tempo or timing.

Lesson 45-Valuable knowledge-How long does it take from the start of your putting stroke until impact? Devices can measure this for you.

Daily Putting Lesson Continued

Lesson 26-You can't judge random. If every stroke is a little different the results will be as well. The best way is the most consistent way

Lesson 27-Looking for a consistent stroke? Starts with distance from the ball. Putter is a yardstick. Putter first, then build your stance.

Lesson 28-Track your results. A consistent miss is easier to fix than random make. Never change your mechanics based on inconsistent results!

Lesson 29-Dont separate stroke mechanics and green reading. Mechanics and tendencies influence the read. Example? ball speed and break.

Lesson 30-If the stroke is consistent the results will be consistent. Consistency eliminates guess work. Random fixes always fail.

Lesson 31-4 sources of motion. Left side/arm, right side/arm, rotate shoulders with passive arms, swing arms with passive shoulders. Choose!

Lesson 32- Combine sources of motion? NO Example, Left arm starts then stops as shoulders take over. Putter gets stuck and right hand flips.

Lesson 33-Conflicts in mechanics=missed putts. If you cant identify single motion source you are using more than one! Easy to fix. Pick ONE!

Lesson 34-Missed putts are easy to analyze. It is either speed or direction. When you judge the reason KNOW why dont ASSUME why.

Lesson 35-Analyzing misses. NEVER FORGET the ball goes where the face is pointed. Path Direction has minor effect! Control face not path.

Robot Testing for Putter Accuracy.

Twice in the same day I read where someone used a robot to test the accuracy of putters. I don't know if this post is necessary but it will contribute to my own mental health and so I write.


Using a robot, when a ball is struck on the sweetspot and all other launch conditions are the same,  regardless of putter design the ball will react in a consistent manner as far as direction. So a high moi mallet and bullseye type blade will show the same results as far as direction the ball starts. Whether the robot swings on an arc like the Iron Archie robot developed by The Putting Arc people or on a vertical plane as developed by Dave Pelz's Perfy. Once the robot is calibrated to position the face correctly and each putter is positioned in the same manner the results will be the same. Consistent path direction, face angle and strike location = a consistent start direction. So any claims must start with the qualifier that results are based on your stroke never changing. 


So for testers to assume that putter design is not a factor in a human's ability to start the ball online is not applicable!!!! Why? Because robots make the same motion regardless of the implement attached and the balance has no influence. So once the robot is calibrated to make a stroke it wouldn't matter what you used as long as the face angle at impact remained the same. 


Humans will react to feel. I have miles of measurements that show over a short period of time how humans react to putter balance. The stroke changes based on what the player feels during the motion.


I spent some time recently with a very high level player. He has always struggled with his putting. After spending some time discussing his stroke, I made the suggestion to change putters to match the rotational requirement of his stroke. Feel now matched consistent mechanics. From the last conversation it sounds like it is going to work.

I guess my point is this. Don't let a marketing pitch or "experts opinion" keep you from being the best player you can be. The only testing that truly counts is the testing you do for yourself. 

Every putting stroke has a rotational requirement to control the face of the putter. Every putter has a rotational value. These values are measurable and predictable and when they match it is easier to swing the putter in a consistent manner. 

Every putting stroke as a directional bias that helps the player match the arc of the stroke to the target line at impact in a different manner. This mesh point of path, target line and face position is influenced by the offset of the putter and then fine tuned by the weight. Overall and distribution.

Get them all to match YOUR stroke and you are on your way to success.

Bruce

The Daily Putting Lesson Continued....

Lesson 16 Knowledge is power. Understanding the mechanics of your stroke is how you eliminate the mechanical thoughts during the stroke.

Lesson 17-Use your source of motion as the trigger to start your stroke. It takes the stroke out of your hands and enhances consistency.

Lesson 18-Build your putting routine based on the elements of your mechanics. Use your putter as the yardstick to build a consistent set up.

Lesson 19-You will have more success if you fit the putter to your posture and mechanics. Harder to change your mechanics to match a putter.

Lesson 20-Find the right putter! Fit shaft placement to the size of the arc, offset to release, weight to tempo. #BurntEdgeConsulting

Lesson 21-Easy to show how players react to different styles of putters. Better to find the correct one than mask the feel with "technology"

Lesson 22-Find the putter weight you can control for putts of all lengths. Heavy=slower Lighter=faster. What do you need?

Lesson 23-Match weight to timing and tempo. Looking for even paced stroke and a consistent amount of time. Too slow just as bad as too fast.

Lesson 24-Putter MOI is a function of more than how the weight is distributed in the putter head. Grip weight, shaft weight, all play a role.

Lesson 25-As with all things in putting, too much is as bad as not enough. High MOI putters do not rotate easily. Match MOI to your stroke.

 

Putting Advice continued...

Lesson 6 Poor putters fight their natural tendencies-Great putters use them and learn from them. Perfection comes from consistency!

 

Lesson 7. The putter arcs on a plane. The plane tilts in two directions-upright to flat & left or right. Best way is your way. #consistency

 

Lesson 8-All strokes have some directional bias or stroke plane tilt to the left or the right. Go with it! Swing the putter-don't steer it!

 

Lesson 8-Directional path of your golf stroke is a function of lateral spine tilt and source of motion. Tomorrow-effect of spine tilt.

 

Lesson 9-Spine tilt influences the path direction of your stroke. Spine toward the target-putter goes left-spine away putter swings right.

 

Lesson 10 Source of motion tilts the plane. 4 basic sources-lead arm, rear arm, shoulders rotate around spine, arms swing minimal shoulders.
 

Lesson 11 shoulder driven strokes and arm swing (S. Utley) around the spine strokes are direction neutral-putter should follow shoulder line

Lesson 12-Lead arm dominant (Stockton)tilts the stroke toward the player. Trail arm stroke (TWoods and others) tilts the path away.

Lesson 12-Lessons 7-12 determine path tilt. Inside out, outside in or something in between. All greats have it. Don't try to fix it. USE IT!

Lesson 13- Distance from the ball+spine tilt+source of motion=Your Putting Stroke. Solution to all problems is in that equation.

Lesson 14-Three ways to learn to putt. Copy a forced method. Copy another player or build your own method. The best always built their own.

Lesson 15-Learn your tendency, face position to path. Are you closed or open? Path tilt+/-face to path= square to the target? 

The Daily Lesson

Posting a Lesson a Day on Twitter @burntedgeputts. tell your friends and follow along.


Putting Lesson 1 Let your eyes tell you where to stand. Recommended postures only work if they allow accurate perception of the target line.

Lesson 2. Fit the putter to the player NOT player to the putter. Off the rack rarely fits.

Lesson 3 - Path Shape-Arc or straight? It is not a choice but a function of ball position and posture. Don't fight yourself.

Lesson 4 Learn how the relationship of putter face to path often differs from relationship of putter face to target.

Lesson 5! Every putting stroke has a rotational requirement and every putter has a rotational value. It helps when they match.

Finding the Correct Putter to Improve Ball Roll.

I have spent more time than I should thinking about the concept of the ball rolling "better" or many of the other invented terms to get you to think you have a problem with your putting. 

I once saw an advertisement for a new golf club that stated "we don't swing the golf clubs in the manner they were designed". In a subtle way I think that is true. A perfect example of this would be a player moving to a flatter one plane move with clubs that are bent upright. Sorry but Jack Nicklaus could not use Ben Hogan's clubs.


Bruce Blades by Byron Morgan

In a way, a similar comparison can be made in putting. Anyone who has seen our research sees immediately that the design features of a putter can influence how you swing the putter. In very simple terms if the shaft and position of the putter head relative to the shaft do not fit the plane of the stroke the putter becomes unbalanced in motion. The reaction of the player is to tense up or attempt to steer the putter to make it go where the player wishes. This tug of war, however subtle result in burnt edges at best and the yips at worst. 

As I continue to teach and preach about the mechanics of putting, it is very apparent that when the technique matches the putter the ball leaves the putter in the most efficient manner. Giving the player that good roll impression. When the putter is unbalanced to the stroke and the steers and tension sets in,  the ball no longer comes off the putter cleanly. Example, Ben Crenshaw would not get the "roll" he desires with a face balanced mallet. Neither would Tiger with a heel shaft mallet. The putter does not match the arc plane of the stroke!

When I have a discussion with the manufacturers about this, they readily admit they cannot build putters specifically for each golfers tendencies. Their solution is to create extreme design features of loft and weight to counter the steer. In effect they numb the feel of the stroke to the player and the putter swings the player. Or they create an artificial launch condition based on the most common problems.  Here is an example. The most common problem we see in stroke mechanics is what is called an "add loft" situation. The player increases the loft of the putter at impact -hands behind the ball-to the point the ball jumps up or bounces before it begins to roll. So some smart putter designers build a putter with reduced loft to counter the the added loft situation. It improves speed and how the ball comes off the putter, but did the player get any better? I am not sure that better results from a complicated stroke is a reliable way to improve. It surely limits the ability to improve.  


I understand from a players point of view that this might make the game easier but there is a limit to your success. So much of putting is feel and touch that to numb that feel has to limit your opportunity to find out how good you can be. With good players I call this the wall. 


So my contention is too find a putter that matches your stroke and ENHANCES THE FEEL rather than limiting it and the ball roll will take care of itself.